Everyone knows that air suspension blowers need to be cleaned regularly after long-term use. If not cleaned, it will affect the normal use of the air suspension blower. But many customers know that regular cleaning is necessary, but they do not know how to properly clean the air suspension blower. Next, Shengyuan Technology will tell you.
To clean the air suspension blower, we need to remove the fan. However, because the fan inside the air suspension blower is relatively delicate, we need to be careful when removing it and take good care of all the components of the fan to avoid missing parts after cleaning and reinstalling. When dismantling the fan, we need to first remove the processing box and bearing box. If we don't remove them first, it will affect the cleaning effect of the fan.
We need to pay special attention to the disassembly and cleaning of the direct drive motor during cleaning to avoid mechanical failures caused by motor combustion. After cleaning the fan, it should be installed in a reasonable order. After installation, adjust each part to see if it can be used normally.
Therefore, we should start from these key points when disassembling and assembling fans. Only by focusing on these key points can we ensure the accuracy of actual disassembly work, reduce the possibility of problems during assembly after cleaning work, ensure that users can ultimately use the air suspension blower normally, and ensure that production work is not affected.
