Air suspension blower is a type of blower widely used in various industries and loved by customers. The air suspension blower is composed of impeller, spiral shell, regulating mechanism, high-speed rotor, bearings, shaft seal, lubrication system, etc. Next, Lianyungang Shengyuan Technology Co., Ltd. will tell you which accessories the air suspension blower is composed of.
1. Impeller
The impeller of the air suspension blower is designed based on three-dimensional flow theory and is made of cast aluminum, forged steel, and stainless steel. It has undergone strict and sophisticated processing, and the impeller is calibrated through dynamic and static balance. In addition, the strength of the impeller is ensured through an overspeed test at 1.15 times the rated speed, so it not only has high efficiency, but also meets the needs of different working conditions.
2. Gear
The air suspension blower adds a gear pair with involute teeth, and the surfaces of the large and small gears are nitrided and hardened to ensure stable operation of the fan at high speeds. This not only reduces vibration and noise, but also greatly improves the service life of the fan.
3. Adjustment mechanism
The regulating mechanism of the air suspension blower is installed before the impeller inlet, and it consists of a housing, guide vanes, connecting rods, automatic actuators, regulating diffusers, etc. The gap between the impeller cover and the impeller ensures the normal operation of the impeller cover. So the air suspension blower can automatically adjust the rotation angle of the guide vanes.
4. High speed rotor
The high-speed rotor of an air suspension blower is composed of an impeller, a high-speed gear, and a high-speed shaft. The impeller is connected to the high-speed shaft through a tie rod, and torque is transmitted through end pins. In order to ensure the smooth and reliable operation of the fan, the overall balance accuracy of the high-speed rotor should reach G1 level.
5. Bearing
The high-speed shaft support of the air suspension blower adopts inclined pad sliding bearings, which are composed of multiple movable pads that can deflect around the pivot point. It has good anti vibration performance and can automatically adjust according to changes in load and speed.
6. Shaft seal
The shaft seal of the air suspension blower adopts a split type labyrinth seal structure, which has the characteristics of good air tightness and easy disassembly. It can replace the seal without disassembling the impeller.
7. Lubrication system
The lubrication system of the air suspension blower is composed of two combinations: an oil tank and a lubricating oil circuit. The base of the device can be used as an oil tank or equipped with an immersion electric heater and temperature control switch to ensure the temperature of the lubricating oil. The lubricating oil circuit includes a main oil pump, an electric pump, a dual tube filter, etc. The main oil pump is driven by a low-speed gear, and when the unit is running normally, it can provide lubricating oil to lubricate the gears and bearings at normal pressure.
The above is the composition structure of the air suspension blower. If you want to know or purchase an air suspension blower, you can call our company's hotline, and we are more than happy to serve you.
