Before using an air suspension fan, it is essential to carry out proper debugging work. This not only ensures the normal operation of the machine, but also greatly improves the efficiency of the equipment. We can only achieve better performance of the air suspension fan by fully debugging it. Next, Lianyungang Shengyuan Technology Co., Ltd. will tell you the debugging steps of the air suspension fan.
Firstly, we need to adjust the current of the air suspension fan. When the air suspension fan starts at full pressure, the current is about 5-7 times the rated current. The voltage reduction starting torque is proportional to the square of the voltage. When the power grid capacity is insufficient, we can adopt voltage reduction starting. Then we need to debug the power issue of the air suspension fan. During the fan test, it is best to close the valve on the fan outlet or outlet pipeline, and slowly open the valve after operation until it reaches the desired working condition. Then we need to pay attention to whether the operating current of the air suspension fan exceeds the rated current.
Secondly, we need to improve our observation of whether there are any problems with the air suspension fan, such as one person restraining the power supply and one person observing the operation of the fan during testing. If any problems are found during inspection, we should stop the machine in a timely manner for inspection and maintenance to avoid accidents. Before testing, we must check the product manual in advance to see if it matches the wiring diagram, and whether the working voltage of the shield supplied air suspension fan power supply meets the requirements, etc. During use, it is also necessary to constantly pay attention to whether the input current of the fan is normal. If it is not normal, it must be checked and repaired in a timely manner.
The above are the debugging steps for air suspension fans. If you still have any questions, you can call the telephone hotline of Lianyungang Shengyuan Technology, and we will answer them one by one for you.
